Home » Products » Cartridges » ETI200
ETi200 Eddy Current Cartridge

ETI200 CARTRIDGE

The ETI200 is designed to offer advanced multi-frequency and multi-channel flaw detection.  Combined with the PragmaLite, it is the best solution for portable applications.  Combined with the PragmaPod, it can be used remotely for automated or specialized applications.

Appealing to all sectors within NDT, the ETI200 allows operators to program not only frequency, but many other advanced functions. With single probe operation, the ETI200 can multiplex eight channels, making it the most flexible portable unit available. Alternately with two probes connected the ETI200 allows any mix of eight channels across two probes.

POWERFUL YET SMALL

With a compact footprint, the ETI200 offers the user more advanced features than any equivalent unit. Sympathetically designed with end users in mind, the ETI200 includes an adjustable hand-strap, harness attachment points and meets the IP54 standard making it splash and dust proof.

 

LARGE HIGH DEFINITION DISPLAY

The ETI200 has an impressive 7” diagonal 800 x 480 pixel colour TFT display. Colours on the display are user-programmable and menus incorporate feature friendly icons. The display can be presented with one, two or four panes. Each pane can in turn have any channel displayed on it in different colours.

STATE-OF-THE-ART COMMUNICATIONS & DATA STORAGE

The ETI200 allows USB peripherals (memory stick, mouse, keyboard) to be connected; i.e. USB “on-the-go”. The ETI200 features an Ethernet port for software upgrades and future functions and a full-size 32Gb SD Card slot. At a 25k sample rate, the ETi-200 can store as much as 48 hours of continuous live recordings.

 

USER FRIENDLY INTERFACE

The ETI200 offers a choice of navigation through a rapid ‘Smart Wheel’ control wheel or a four-way cursor function. Across all menus active functions are highlighted. Embedded HELP text is incorporated throughout the ETi-200 menus. The ETI200 also incorporates many direct keys for the most common operations and functions.

PROBE
Modes Absolute probes
Reflection, Bridge and Rotary
Reflection and Bridge Probes
Absolute and Bridge modes selectable at 50 or 100 ohm.
Test Up to 8 channels with 12 user definable mixers
Frequency 10 Hz to 15 MHz in 0.01 increments per Hz, kHz or MHz range
Drive 0.10 to 20.00 Volts pk-pk in 0.01V increments
SIGNAL
Phase 0° to 359.9° in 0.1° increments
Gain -12.0 to +100 dB in 0.1 steps
X/Y Axis Spread Any valid gain value on either channel.
With lockable relative values.
Digitizing Rate 36 kHz max above 300kHz drive frequency
Filter Band Pass, High Pass and Low Pass
Load Automatic load selection for absolute probes with manual override
8 values 1.3 uH to 470 uH
CONNECTORS
ECT Probes LEMO 2-pins for absolute probes
LEMO 12-pins connection for Reflection, Bridge and Rotary
LEMO 12-pins for Reflection and Bridge Probes
EMBEDDED CARTRIDGE SOFTWARE
Menu System Expert Menu and Quick Access Menu
Navigation Scroll-wheel, Keypad, External Keyboard, Mouse
Expert Menu 9 complete pages (workflow)
System
General
Probes and Wedges
Part
Scans
Calibration
Display
Encoders
Scanner
Quick Access Menu 5 pages of parameters
Views Impedance (phase) plane
Strip chart
Time base
Cursors 2x Cartesian cursors per view
Screen Layouts More than 5 Presets
1, 2 or 4 panels
Modes Stop, Live, Record, File Analysis, Report View
Calibration Span
Lift-Off
Balance
Reports HTML, Simplified HTML (RPT)
GENERAL
Dimensions 160 x 200 x 45 mm
(6.3 x 7.8 x 1.9 in.)
Weigth 0.45 kg (1.8 lb)
Operating Temperature -10 to 40 C (14 to 104 F)